Ubiquiti Access G2 Starter Kit

A quick start to Access with everything you need for a single-reader door:

• (1) UniFi Access Door Hub
• (1) Access Reader G2
• (10) UniFi Access Cards

Technical Specifications
UA-Hub-Door
Mechanical

• Dimensions: 174.9 x 126 x 32.9 mm (6.9 x 5 x 1.3")
• Weight: 363 g (12.8 oz)
• Enclosure material: Polycarbonate
• Mounting material: Polycarbonate

Hardware

• Network interface: (5) 10/100/1000 Base-T
• Power method: PoE++
• UL 294 power-limited Class 2 power supply
• UL 60950/62368 LPS/PS2 power supply
• Max. power consumption: Without PoE output: 30 W. With PoE output: 50 W
• PoE input: 50 V DC, 1 A
• PoE output: PoE passthrough, (4) PoE, 50 V DC, total 20 W
• Button: (1) Factory reset
• LEDs: System: white/blue. Output relay: white
• Digital input: Request-to-exit/Request-to-enter/Remote release/Door position sensor
• Dry output relay: Lock: 30 V DC, 1 A. Aux: 30 V DC, 1 A
• Powered output relay: Lock: 12 V DC, 1 A. Aux: 12 V DC, 0.33 A. 12 V DC, 0.33 A

Operating Environment

• Indoor use only
• Operating temperature: 0 to 40 °C (32 to 104 °F)
• Operating humidity: 5 to 95% non-condensing

UL 294 Level

• Forced entry: Level I
• Line security: Level I
• Endurance: Level I
• Standby power: Level I

UL 294 Statement

• Compliance with IEEE 802.3 specifications (at or af) has not been evaluated under UL 294.
• The device is intended to comply with Section 725.121 of the National Electrical Code, ANSI/NFPA 70, Power Sources for Class 2 and Class 3 Circuits.

CAN/ULC-60839-11-1 Class

• Grade: 1

Certifications

• CE, FCC, IC, UL 294, CAN/ULC-60839-11-1

Document Number and Issue Date and/or Revision Level

• UA-Hub-Door002, V01

Wiring Information

• Typical installation (shielded):
• DC input: Belden 8750 18 AWG 2 conductor (30.5 m/100 ft)
• Door position switch: Belden 8750 18 AWG 2 conductor (152.5 m/500 ft)
• Request-to-exit: Belden 8750 18 AWG 2 (152.5 m/500 ft)

Wire Gauge Requirements (AWG)

• Total length to device vs. output load current at 12 V DC:
• 100 mA | 250 mA | 500 mA | 1 A
• 6.1 m (20 ft): 22 | 22 | 22 | 22
• 15.2 m (50 ft): 22 | 22 | 22 | 18
• 30.5 m (100 ft): 22 | 22 | 18 | 18

PoE Wiring Requirements

• Minimum allowable conductor size for the link between the PSE or power injector and the PD is 24 AWG (0.21 mm²) for horizontal or riser cabling.

LEDs

• PoE in: Solid blue: Adopted/device ready. Solid white: Adoption pending. Flashing white/blue: Firmware updating
• PoE out: Off: Not connected or no data link. Solid blue: Connected and data link active

UA-G2
Mechanical

• Dimensions: 93 x 40 x 36.5 mm (3.7 x 1.6 x 1.4")
• Weight: 82 g (2.9 oz)
• Enclosure material: Polycarbonate, glass
• Mounting: In-wall, junction box
• Weather resistance: IP55

Hardware

• Network interface: (1) 10/100 MbE RJ45 port
• Connectivity: BLE 4.1
• Power method: PoE
• Supported voltage range: 48 V DC
• Max. power consumption: 5 W
• ESD/EMP protection: Air: ±15 kV, Contact: ±8 kV
• Sensors: Proximity sensor
• Speaker: (1) 8 Ohm, 0.7 W
• LEDs: R/G/B/W
• Button: (1) Factory reset
• NFC frequency: 13.56 MHz
• NFC read range: < 30 mm
• NFC standards: ISO 14443A, 14443B, 15693
• NFC technology: NFC Tag 1, 2, 3, 4, 5. MIFARE Classic. MIFARE Plus. MIFARE Ultralight. MIFARE DESFire

Operating Environment

• Operating temperature: -30 to 45 °C (-22 to 113 °F)
• Operating humidity: 5 to 90% non-condensing

Certifications

• CE, FCC, IC

UA-Card
Mechanical

• Dimensions: 85.6 x 53.98 x 0.84 mm (3.37 x 2.13 x 0.03")
• Weight: 5 g (0.18 oz)
• Format: ISO 7810 ID-1

NFC

• NFC frequency: 13.56 MHz
• NFC technology: ISO/IEC 14443 Type A. MIFARE DESFire. UniFi Access proprietary security protocol