Name: Ubiquiti UniFi Switch USW-Enterprise-24-PoE 400W
Brand: Ubiquiti
SKU: usw-enterprise-24-poe
Price: 741.59 EUR
Availability: InStock

Highlights at a Glance

Layer 3 Switching: Configurable Gigabit Layer 3 with static routing, inter‑VLAN routing, and DHCP server/relay.
High‑Power PoE+: 24 ports of auto‑sensing 802.3at PoE+ with 400W total budget, up to 34.2W per port.
Multi‑Gigabit Access: 12 x 2.5 GbE RJ45 ports for Wi‑Fi 6 APs and high‑speed devices.
10G Fiber Uplinks: 2 x 10G SFP+ ports for high‑capacity backbone connections.
1.3" Touchscreen: LCM display for quick status and management.
Redundant Power: USP‑RPS DC input for backup power protection.
Advanced Security & Management: 802.1X, DHCP snooping, ACLs, and UniFi Network integration.

Performance & Throughput

The USW-Enterprise-24-PoE delivers a switching capacity of 124 Gbps and a total non‑blocking throughput of 62 Gbps, with a forwarding rate of 92 Mpps. A 2 MB packet buffer, jumbo frame support, and flow control ensure smooth handling of bursty traffic and large data transfers. The switch supports up to 1,000 VLANs and a MAC address table of 16,000 entries, making it suitable for dense, segmented network environments.

Power over Ethernet & Redundancy

All 24 RJ45 ports provide PoE+ (IEEE 802.3af/at) with a total power budget of 400W. Each port can deliver up to 34.2W, with voltage ranges of 44–57V in 802.3af mode and 50–57V in 802.3at mode. The internal 550W AC/DC power supply handles the full PoE load, while the USP‑RPS DC input offers intelligent backup power to protect against internal PSU interruption or failure.

Layer 3 Features & Management

Full Layer 3 capabilities include static routing (up to 256 IPv4 routes), inter‑VLAN routing, DHCP server for local networks, and DHCP relay. The switch integrates seamlessly with the UniFi Network application (version 5.14.12 or later) for centralized, in‑band Ethernet management. Advanced IGMP configuration, voice VLAN, LLDP‑MED, and Pro AV profiles (including Dante, Q‑SYS, NDI, and SDVoE) simplify multimedia and converged network deployments.

Security & Network Control

Robust security features protect the network edge. 802.1X authentication, MAC‑based and IP‑based ACLs (128 entries each), DHCP snooping and guarding, port isolation, and MAC‑based port restriction enforce access policies. Storm control, multicast/broadcast rate limiting, egress rate limiting, and loop protection maintain network stability. The switch is NDAA compliant and carries CE, FCC, IC, and Anatel certifications.

Dimensions	442 x 325 x 44 mm (17.4 x 12.8 x 1.7")
Weight (without mount)	5.1 kg (11.3 lb)
Weight (with mount)	5.2 kg (11.5 lb)
Enclosure Material	SGCC steel
Mount Material	SGCC steel
Supported Rack Depth	400–1200 mm (15.7–47.2")
LCM Display	1.3" touchscreen
ESD Protection	Air: ± 16 kV, Contact: ± 12 kV
Ambient Operating Temperature	-5 to 40° C (23 to 104° F)
Ambient Operating Humidity	10 to 90% noncondensing
Certifications	CE, FCC, IC, Anatel: 05485-22-08356
NDAA Compliant	True
Switching Capacity	124 Gbps
Total Non‑Blocking Throughput	62 Gbps
Forwarding Rate	92 Mpps
Packet Buffer Size	2 MB
MAC Address Table Size	16,000
Supported VLANs	1,000
IPv4 Static Routes	256
Access Lists – IPv4	128
Access Lists – MAC	128
Networking Interfaces (1 GbE RJ45)	12 x 10/100/1000 Mbps
Networking Interfaces (2.5 GbE RJ45)	12 x 100/1000/2500 Mbps
SFP+ Interfaces	2 x 1/10G SFP+
PoE Interfaces	24 x PoE+ IEEE 802.3af/at
Max. PoE+ Wattage per Port by PSE	34.2W
Voltage Range 802.3af Mode	44 to 57V
Voltage Range 802.3at Mode	50 to 57V
Total PoE Availability	400W
Power Method (AC input)	100–240VAC, 8.5A Max., 50/60 Hz
Power Method (USP‑RPS DC input)	52VDC, 7.7A; 11.5VDC, 8.7A
Power Supply	AC/DC, internal, 550W
Max. Power Consumption	60W (Excluding PoE Output), 460W (Including PoE Output)
Heat Dissipation	204.7 BTU/hr (Excluding PoE Output)
Management Interface	Ethernet In‑Band
Services	SMB Layer 3 PoE Gigabit Ethernet Switch
LACP Port Aggregation	True
STP & RSTP	True
QoS (DSCP)	True
Pro AV Profiles (Play, Dante, Q‑SYS, NDI, SDVoE, Shure, AES67, Crestron)	True
Advanced IGMP Configuration (Querier, Fast Leave, Router Port)	True
IGMP Snooping	True
802.1X Control	True
MAC‑Based ACLs & Device Isolation	True
DHCP Snooping & Guarding	True
Egress Rate Limit	True
Flow Control	True
Storm Control	True
Multicast & Broadcast Rate Limiting	True
MAC Address Blocking	True
IP‑Based ACLs & Network Isolation	True
MAC‑Based Port Restriction	True
Port Isolation	True
Port Mirroring	True
Jumbo Frames	True
LLDP‑MED	True
Voice VLAN	True
Loop Protection	True
Virtual Network Override	True
DHCP Server (Local Networks)	True
DHCP Relay	True
Inter‑VLAN Routing (Local Networks)	True
Static Routing (Local Networks)	True
Application Requirements – UniFi Network	Version 5.14.12 and later

# Ubiquiti UniFi Switch USW-Enterprise-24-PoE 400W A managed Layer 3 switch with 12x 1G PoE+, 12x 2.5G PoE+, and 2x 10G SFP+ ports, providing 400W total PoE budget for high-bandwidth enterprise access and aggregation. Key facts: - Ports: 12x 10/100/1000 RJ45 PoE+, 12x 100/1000/2500 RJ45 PoE+, 2x 1/10G SFP+ - Switching capacity: 124 Gbps, non-blocking throughput: 62 Gbps, forwarding rate: 92 Mpps - PoE: 24x PoE+ IEEE 802.3af/at, max 34.2W per port, total PoE budget 400W - Power: internal AC/DC 550W, 100-240V AC, 8.5A max, 50/60 Hz; USP-RPS DC input (52VDC/11.5VDC) - Management: Ethernet In-Band, UniFi Network application v5.14.12+ - Form factor: 1U rack mount, 442 x 325 x 44 mm, 5.11 kg (without mount) - Operating environment: -5 to 40°C, 10–95% noncondensing; ESD protection ±16kV air, ±12kV contact - Certifications: CE, FCC, IC; NDAA compliant; warranty: 12 months Ideal for: enterprise deployments needing high-density 2.5GbE PoE+ for Wi-Fi 6 APs, 10G fiber uplinks, and Layer 3 routing with redundant power support.

Machine-readable — citable by AI bots and assistants.