Poynting · Antennen · 5G/LTE · KFZ/Marine · A-MIMO-0004-V1-04-W · weiß · SMA (M) · 3,5~6dBi · 2M SMA-M Kabel · IP69K

Key Benefits at a Glance

• Broadband frequency coverage across five discrete bands from 617 to 6000 MHz for modern LTE and 5G technologies
• 4x4 MIMO with four cellular antennas in a single housing
• IP69K protection rating for use in the harshest environmental and weather conditions
• Ground-independent design with internal grounding simplifies installation
• Versatile mounting options on masts, walls, surfaces, and in marine applications
• Wind-resistant up to 220 km/h for permanent use in exposed locations

Performance & Frequency Coverage

The antenna supports five discrete frequency bands: 617 to 960 MHz, 1427 to 1517 MHz, 1710 to 2700 MHz, 3400 to 4200 MHz, and 5000 to 6000 MHz. This covers modern LTE and 5G frequency ranges and prepares for future cellular technologies up to 6 GHz. The maximum gain reaches 6 dBi in the 5000 to 6000 MHz band, while the lower bands exhibit correspondingly lower values. Across all bands, the VSWR is less than 2:1, ensuring efficient matching to connected radio equipment.

The 4x4 MIMO configuration with four separate cellular antennas within a single housing enables higher data rates and more stable signal transmission. With a power input of 10 W and an input impedance of 50 ohms, the antenna is compatible with standard radio and router infrastructure. Linear vertical polarization and DC short-circuit complete the electrical profile for reliable operation in mobile environments.

Robust Construction & Environmental Protection

The housing achieves the IP69K protection rating, making it fully sealed against high-pressure water jets and dust ingress. The antenna is also tested for salt spray resistance according to MIL-STD 810G and ASTM B117 and has an impact resistance rating of IK 10. The radome is made of PC+ABS with halogen-free, UV-stable ASA and meets the UL 94-HB flammability class.

The permissible operating temperature range spans from -40 °C to +80 °C, with the storage range covering the same interval. At a relative humidity of up to 98% during operation or 5% to 95% during storage, the antenna withstands humid environments over the long term. Wind resistance up to 220 km/h qualifies it for use in exposed vehicle and marine locations.

Mounting & Installation

The antenna is designed to be ground-independent and features internal grounding, eliminating the need for an additional ground plane for proper operation. Several mounting options are available: on masts, walls, surfaces, and in marine applications, with an optional magnetic mount also offered. The included bracket features threaded studs with a 25 mm diameter for clamp thicknesses up to 70 mm, as well as an adhesive-surface mounting variant.

Each of the four ports is equipped with a 2 m long RTK-031 coaxial cable and an SMA male connector. Cable attenuation is 0.56 dB/m at 900 MHz, 0.785 dB/m at 1800 MHz, and 1.2 dB/m at 3000 MHz. These values should be considered when planning cable routing and signal budgets in vehicles and on watercraft.

Certifications & Compliance

The antenna complies with the RoHS Directive 2011/65/EU and is manufactured under ISO 9001:2015. The CE marking confirms conformity with European requirements. The EU homologation E1*10R06/02*9871*00 certifies its suitability for use in motor vehicles. The warranty period is 24 months.