Poynting · Antennen · LTE/GSM · Mast/Wand · A-OMNI-0121-01-V3 · weiß · SMA (M) · 5m · 2,4dbi Rundstrahl/Wand SMA-M "LTE"
The Poynting A-OMNI-0121-01-V3 is a medium-gain omnidirectional LTE/GSM antenna covering the GSM 900, GSM 1800/UMTS, and LTE frequency bands from 690 to 2700 MHz. Designed for installers and M2M applications, it comes with a 5 m HDF-195 cable and SMA male connector.
- Frequency bands
- 690 – 960 MHz | 1710 – 2170 MHz | 2300 – 2700 MHz
- Gain (max)
- 1.8 dBi @ 690-960 MHz | 6 dBi @ 1710-2170 MHz | 5 dBi @ 2300-2700 MHz
- VSWR
- <2:1 across 90% of the bands
- Input power
- 10 W
Description
Key Benefits at a Glance
- Mast and wall mounting: flexible installation options with included bracket
- Vandal- and water-resistant: IP 65 housing for use in demanding environments
- Broadband: covers most international GSM and LTE bands
- Consistent high gain: uniform amplification across a very wide frequency range
- Lightweight: easy handling and installation at just 0.43 kg
- Extended range: can increase connectivity range by a factor of 3 or more
Performance and Frequency Coverage
The antenna operates omnidirectionally across three frequency ranges: 690 to 960 MHz with a maximum gain of 1.8 dBi, 1710 to 2170 MHz with up to 6 dBi, and 2300 to 2700 MHz with up to 5 dBi. VSWR is less than 2:1 across 90% of the bands. It supports cellular technology including 2G, 3G, 4G, and 5G, covering a wide range of LTE/4G and 5G bands. The polarization is linear, and the radiation pattern is omnidirectional. The maximum input power is 10 W with a nominal input impedance of 50 ohms.
Design and Environmental Resistance
The housing is made of halogen-free ABS with a UL 94-HB flammability rating and IK 08 impact resistance. The IP 65 rating ensures protection against water and vandalism. Approved for outdoor and indoor use, the antenna withstands wind speeds up to 160 km/h. It is tested to MIL-STD 810F/ASTM B117 for salt spray resistance and operates at relative humidity levels up to 98%. The permissible operating temperature range is from -40 °C to +70 °C. The radome is in RAL 7047 (telegrey), with a black end cap. With dimensions of 590 mm × 80 mm × 55 mm and a weight of 0.43 kg, the antenna is easy to handle and install.
Applications
The antenna is ideal for providing rural and remote wireless services as well as M2M communication such as ATMs, financial data processing, and telemetry. It extends wireless data transmission to areas with weak signals and can increase connectivity range by a factor of 3 or more. In cases of poor data signal reception, slow data transfers, or unstable connections, it enhances system transmission reliability. Its versatile base station capabilities make it a popular choice among installers.
Scope of Delivery and Mounting
The antenna is supplied with a 5 m HDF-195 coaxial cable and an SMA male connector. The cable has an attenuation of 0.385 dB/m at 900 MHz, 0.565 dB/m at 1800 MHz, and 0.666 dB/m at 2400 MHz. A DC short circuit is included. Mounting is possible on a mast or on a wall using an L-bracket. The configuration is SISO with one LTE port.
Specifications
| Frequency bands | 690 – 960 MHz | 1710 – 2170 MHz | 2300 – 2700 MHz |
| Gain (max) | 1.8 dBi @ 690-960 MHz | 6 dBi @ 1710-2170 MHz | 5 dBi @ 2300-2700 MHz |
| VSWR | <2:1 across 90% of the bands |
| Input power | 10 W |
| Input impedance | 50 Ohm (nominal) |
| Coaxial cable type | HDF 195 |
| Coaxial cable length | 5 m |
| Coaxial cable attenuation | 0.385 dB/m @ 900 MHz | 0.565 dB/m @ 1800 MHz | 0.666 dB/m @ 2400 MHz |
| DC short circuit | Yes |
| Wind survival rate | ≤160 km/h |
| Operating temperature | -40 °C to +70 °C |
| Environmental conditions | Outdoor/Indoor |
| Ingress protection | IP 65 |
| Salt spray resistance | MIL-STD 810F/ASTM B117 |
| Relative humidity (operation) | up to 98% |
| Storage humidity | 5% to 95% – non-condensing |
| Storage temperature | -40 °C to +70 °C |
| Flammability rating | UL 94-HB |
| Impact resistance | IK 08 |
| Polarization | Linear |
| Radiation pattern | Omnidirectional |
| Mounting options | Mast mounting, L-bracket mounting |
| Technology | Cellular (LTE/2G/3G/4G) |
| MIMO | SISO |
| LTE ports | 1 |
| Connector type | SMA (M) |
| Connections | SMA, FME |
| Wi-Fi standard | Wi-Fi 3 (802.11g) |
| Product dimensions | 590 mm × 80 mm × 55 mm |
| Packaging dimensions | 595 mm × 130 mm × 65 mm |
| Weight | 0.43 kg |
| Packaging weight | 0.60 kg |
| Radome material | ABS (halogen-free) |
| Radome colour | Pantone – Cool Gray (1C) | RAL 7047 |
| End cap colour | Pantone – Black | RAL – Black |
| Certifications | RoHS 2011/65/EU, ISO 9001:2015, CE, IP 65 |
| Warranty | 24 months |
AI Fact Sheet
Downloads
Related products
- Poynting · Antennen Zubehör · Kabel · A-CAB-148 · 5m HDF195 · N (M) zu SMA (M) · white · Nickel beschichtet€32.41excl. VAT
- CAB-143 | 3m Twin Pair HDF195 White with SMA(m) to SMA(f) (Gold plated)€36.00excl. VAT
- Poynting · Antennen Zubehör · Kabel · A-CAB-159 · Kabelbaugruppe RA-SMA (m) auf RA-SMA (m); RG-178 (250 mm)€31.49excl. VAT
- Poynting · Antennen · LTE ·A-OMNI-0510-V1-02 · schwarz · SMA(m) 1m€40.00excl. VAT
- Poynting · Antennen · Wi-Fi · A-OMNI-0785-V1-01 · SISO · grau · SMA (m)€28.97excl. VAT
