Poynting · Antennen · LTE/GSM · Mast · A-LPDA-0092 · silber · SMA (M) · LoRa Helium · 11dbi Yagi/Mast · SMA -Male · 7m Kabel

Key Benefits at a Glance

• Wideband Coverage: 698 to 3800 MHz, including 2G, 3G, and 4G technologies as well as the 5G CBRS band from 3.2 to 3.8 GHz
• Directional Performance: high gain of up to 11 dBi with an approximately 50° wide main beam for easy alignment
• Durability: IP65 protection, wind-resistant up to 160 km/h, operational from −40 °C to +70 °C
• Flexibility: pole-mount mast installation with a low weight of 1.63 kg, suitable for indoor and outdoor use
• Ready to Connect: 7 m HDF-195 coaxial cable with SMA (male) connector for direct installation

Product Overview

The Poynting LPDA-92 is a log-periodic dipole array antenna that covers all international cellular mobile and wireless data bands, including GSM 900, GSM 1800, UMTS, and LTE. It also supports extended cellular and WiMAX bands, such as European and American digital dividend bands, as well as licensed and unlicensed 2.3 to 2.7 GHz data bands. This antenna stands out for combining ultra-wideband operation with consistently high gain.

Compatible with 2G, 3G, and 4G technologies, the antenna is also 5G-ready, as it covers the CBRS range from 3.2 to 3.8 GHz. It is ideal for applications utilizing GSM networks, including LTE, HSPA, 3G, EDGE, and GPRS. The wideband design means no separate antenna is required for each network operator.

Performance & Gain

The antenna achieves a maximum gain of 10.8 dBi in the 698 to 960 MHz range, 11 dBi in the 1710 to 2700 MHz range, and 2.3 dBi in the 3400 to 3800 MHz range. The VSWR remains below 1.5:1 across 95% of the bands, ensuring efficient matching to the connected system. The maximum input power is 10 W with a nominal input impedance of 50 ohms.

The directional pattern with linear polarization and a main beam width of approximately 50° simplifies alignment toward the desired base station. The cable has an attenuation of 0.385 dB/m at 900 MHz, 0.565 dB/m at 1800 MHz, 0.666 dB/m at 2400 MHz, and 0.788 dB/m at 3000 MHz.

Applications

The antenna is particularly well-suited for rural areas with weak data signal reception, where its high gain significantly improves connection quality. It is ideal for applications with slow data transmission, unstable connections, and in LTE fringe areas located near but outside the reach of LTE coverage zones. Both urban and rural deployment sites are supported.

The antenna enhances the reliability of wireless data transmission and increases the overall system’s transmission security. It is designed for use in extreme weather conditions and has a four-year track record in environments ranging from snow and desert to tropical climates.

Design & Mounting

The housing is made of black Nylon 6, while the frame is constructed from passivated ADC12 aluminum in aluminum gray. With dimensions of 1112 × 200 × 47 mm and a weight of 1.63 kg, the antenna is compact and lightweight. Installation is via pole-mount mast mounting. A DC short circuit is included.

The attached HDF 195 coaxial cable is 7 m long and terminates in an SMA (male) connector. Packaging dimensions are 1120 × 210 × 60 mm with a shipping weight of 2.02 kg.

Environmental & Protection Ratings

The antenna is IP65-rated for protection against water and dust ingress and is approved for indoor and outdoor use. It is salt spray resistant according to MIL-STD 810F/ASTM B117 and can operate in relative humidity levels of up to 98%. The impact resistance is rated IK 08, and the housing flammability class is UL 94-HB.

The operating temperature range is −40 °C to +70 °C, with the same range for storage. Storage humidity is 5% to 95% non-condensing. The wind survival limit is up to 160 km/h.

Certifications & Compliance

The antenna complies with CE and RoHS Directive 2011/65/EU, as well as ISO 9001:2015. Manufacturing adheres to these standards, ensuring compliance with quality management and environmental requirements. The warranty period is 24 months.