TELTONIKA TELEMATICS FMC130 4G LTE Cat 1 EMEA MEIG Tracker

Key Benefits at a Glance

• Multi-functional I/O configuration: three digital inputs, two analog inputs, three digital outputs, and one 1-Wire interface
• Dual cellular technology: 4G LTE Cat 1 with GSM fallback for broad network coverage in EMEA regions
• Four GNSS systems: GPS, GLONASS, GALILEO, and BEIDOU with 33 tracking channels and < 2.5 m CEP positioning accuracy
• Integrated high-gain antennas: GNSS and cellular antennas permanently built into the housing, no external antennas required
• Backup battery: 170 mAh Li-Ion battery for continued operation during power loss
• Power management: four sleep modes from GPS Sleep to Ultra Deep Sleep with power consumption as low as < 3 mA at 12 V
• Compact design: 65 × 56.6 × 20.6 mm at 61 g weight

Connectivity & Cellular

The tracker supports 4G LTE Cat 1 on FDD bands B1/B3/B5/B7/B8/B20 and TDD bands B38/B40/B41, as well as GSM on bands B2/B3/B5/B8. Maximum data rates are 10 Mbps downlink and 5 Mbps uplink in LTE FDD mode, and 8 Mbps downlink and 2 Mbps uplink in LTE TDD mode. In GSM mode, GPRS data rates of up to 85.6 Kbps are available in both directions. Transmit power is 33 dBm for GSM850/900, 30 dBm for GSM1800/1900, and 23 dBm for LTE FDD and LTE TDD. Data transmission via SMS is supported for both text and data. Compatible SIM formats include Micro-SIM and eSIM. Bluetooth 4.0 + LE is integrated, enabling wireless connections to external devices.

GNSS Positioning

The receiver uses four satellite systems—GPS, GLONASS, GALILEO, and BEIDOU—supplemented by QZSS and AGPS. With 33 tracking channels and 99 acquisition channels, the receiver achieves a tracking sensitivity of -165 dBm. Positioning accuracy is < 2.5 m CEP, and speed accuracy is < 0.1 m/s within a ±15 % error margin. Hot start takes < 1 s, warm start < 25 s, and cold start < 35 s. The GNSS antenna is designed as an internal high-gain antenna.

Interfaces & Expansions

The device offers three digital inputs, one of which can be configured as a negative input, as well as two pulse inputs on digital inputs 1 and 2. Three digital outputs, two analog inputs, and one CAN adapter input are available. A 1-Wire interface is also integrated. Connectivity includes USB 2.0 via Micro-USB port, two status LEDs to indicate operating condition, and a built-in accelerometer. The internal flash memory has a capacity of 128 MB.

Power Supply & Power Consumption

The input voltage range spans 10 to 30 V DC with overvoltage protection, secured by an internal 3A fuse at 125 V. At 12 V under full load, power consumption is < 250 mA; in nominal operation without load, it is < 33 mA. The four sleep modes reduce consumption in stages: GPS Sleep < 18 mA, Online Deep Sleep < 16 mA, Deep Sleep < 5 mA, and Ultra Deep Sleep < 3 mA. The integrated backup battery is a 170 mAh Li-Ion battery with 3.7 V (0.63 Wh), maintaining operation during power loss.

Environmental Conditions & Protection

The device is rated IP41. Permissible operating humidity ranges from 5 % to 95 % non-condensing. Storage temperature without battery is -20 °C to 85 °C; with battery, it is -20 °C to 45 °C. The battery charges between 0 °C and 45 °C and discharges between -20 °C and 60 °C. Battery storage for one month is specified at -20 °C to 45 °C, and for six months at -20 °C to 35 °C. Certifications include CE/RED, EMark, EAC, RoHS, REACH, CITC, RCM, IMDA, Anatel, JATE, TELEC, SIRIM QAS, SDPPI POSTEL, KC, and ICASA.