TELTONIKA TELEMATICS FMM800 4G LTE Cat 1 Tracker BG95-M3

Key Benefits at a Glance

• OBDII Plug and Play: Tool-free installation via the OBDII socket
• Multi-network cellular: 4G LTE Cat M1 and NB-IoT with fallback to 2G GSM/GPRS
• Six GNSS systems: GPS, GLONASS, GALILEO, BEIDOU, QZSS and AGPS
• Bluetooth LE: Connects to temperature, humidity, and universal BLE sensors
• Built-in accelerometer: Used for ignition detection
• Remote management: Firmware updates via FOTA Web, FOTA, and Bluetooth

Connectivity & Communication

The FMM800 uses the Quectel BG95-M3 module with Teltonika TM2500 for cellular connections over 4G LTE Cat M1 and NB-IoT with fallback to 2G GSM/GPRS. Data transfer reaches a maximum of 588 Kbps downlink and 1119 Kbps uplink in LTE Cat M1 mode. In GSM GPRS mode, maximum speeds are 107 Kbps downlink and 85.6 Kbps uplink.

In addition to data transfer, the tracker supports SMS in TEXT and PDU formats, as well as network protocols TCP, UDP, TLS, and MQTT. The 4G LTE FDD bands for Cat M1 include B1, B2, B3, B4, B5, B8, B12, B13, B18, B19, B20, B25, B26, B27, B28, B66, and B85. For 2G, the GSM bands B2, B3, B5, and B8 are available.

GNSS & Positioning

The FMM800 receives six satellite systems – GPS, GLONASS, GALILEO, BEIDOU, QZSS, and AGPS – via a 33-channel receiver with an internal high-gain antenna. Tracking sensitivity is -165 dBm, with positioning accuracy of less than 2.5 CEP. Hot start takes less than one second, warm start less than 25 seconds, and cold start less than 35 seconds.

Speed accuracy is less than 0.1 m/s with a ±15 percent margin of error. Time synchronization is achieved via GNSS, NITZ, or NTP.

Configuration & Management

The FMM800 is configured and updated via FOTA Web, FOTA, or the Teltonika Configurator, which connects via USB or Bluetooth. SMS is available for configuration, event reporting, and debugging, while GPRS commands support configuration and debugging.

Four sleep modes – GPS Sleep, Online Deep Sleep, Deep Sleep, and Ultra Deep Sleep – reduce power consumption during operation. Bluetooth 4.0 with LE enables connection to a temperature and humidity sensor, an Inateck barcode scanner, and universal Bluetooth LE sensors.

Design & Power Supply

The FMM800 measures 67.2 × 49.6 × 25 mm and weighs 63 g. It features 128 MB of internal flash memory, a micro-SIM card, and a micro-USB 2.0 port. Two status LEDs indicate operational status. Input voltage ranges from 10 to 30 V DC with overvoltage protection, and an internal 3 A fuse at 125 V safeguards the circuit.

An internal 170 mAh Li-ion backup battery (3.7 V, 0.63 Wh) powers the tracker during power loss. With an IP41 rating and an operating temperature range of -40 °C to +85 °C (without battery), it is suitable for vehicle environments. Relative humidity during operation must remain between 5 and 95 percent non-condensing.

Certifications

The FMM800 holds certifications for CE/RED, UKCA, E-Mark, RCM, Anatel, RoHS, and REACH. It also includes a Declaration of IMEI assignment.