Teltonika Telematics Teltonika · Tracker GPS · FTC887

At a Glance

• GNSS: GPS, GLONASS, GALILEO, and BEIDOU with dead reckoning and positioning accuracy of less than 1.5 m CEP
• I/O: four digital and four analog inputs, three digital outputs, 1-Wire, and CAN for flexible vehicle integration
• Connectivity: LTE Cat 1 with max. 10 Mbps downlink and Bluetooth 5.4 with LE
• Autonomy: internal 320 mAh Li-ion backup battery for operation during power loss
• Compact: 77 × 63 × 21.25 mm at 73.7 g with internal high-gain antennas

Connectivity & Communication

The tracker communicates via LTE FDD Cat 1 and GSM/GPRS. In LTE mode, it achieves a maximum downlink speed of 10 Mbps and a maximum uplink speed of 5 Mbps. Over GSM GPRS, the maximum data rate is 85.6 Kbps in both directions. Data transmission supports SMS TEXT, PDU, as well as the TCP and UDP network protocols. The device supports Codec 8 Extended. The SIM card slot accommodates a nano-SIM, and the cellular antenna is designed as an internal high-gain antenna.

GNSS & Positioning

The device receives signals from the GPS, GLONASS, GALILEO, and BEIDOU satellite systems via 135 tracking and acquisition channels. The GNSS accuracy is specified as enhanced and includes dead reckoning. Positioning accuracy is less than 1.5 m CEP, with speed accuracy under 0.1 m/s. Hot start takes less than 1 second, while warm start takes less than 25 seconds. Tracking sensitivity reaches -165 dBm. The GNSS antenna is also an internal high-gain antenna.

Interfaces & I/O

Four digital inputs, one negative input, four analog inputs, three digital outputs, a 1-Wire interface, and a CAN port are available for connecting vehicle systems and external sensors. A USB 2.0 port with a Type-C connector is used for PC connection. Two status LEDs indicate the operational state. The internal flash memory is 128 MB. An accelerometer is integrated.

Power & Housing

The input voltage range is 8 to 32 V DC. At a nominal 12 V without load, current consumption is less than 25 mA; under full or peak load, it is less than 0.25 A. An internal 3 A, 125 V fuse protects the circuit. A 320 mAh Li-ion backup battery (3.7 V / 1.184 Wh) maintains operation during power loss. The device measures 77 × 63 × 21.25 mm and weighs 73.7 g. The protection rating is IP41, with an operating humidity of 65 ± 20 % non-condensing. Mounting is on the battery.

Certifications & Warranty

The tracker holds CE/RED, UKCA, E-Mark, and RCM certifications. Anatel certification is available for the Brazilian market. The manufacturer’s warranty is 24 months.