Ubiquiti USW-INDUSTRIAL-DIN-8-POE 8-Port GbE PoE++ Switch with 2× SFP€412.38excl. VAT
Ubiquiti USW-INDUSTRIAL-DIN-8-POE 8-Port GbE PoE++ Switch with 2× SFP
Ubiquiti USW-INDUSTRIAL-DIN-8-POE 8-Port GbE PoE++ Switch with 2× SFP
Ubiquiti USW-INDUSTRIAL-DIN-8-POE 8-Port GbE PoE++ Switch with 2× SFP
Ubiquiti USW-INDUSTRIAL-DIN-8-POE 8-Port GbE PoE++ Switch with 2× SFP
Ubiquiti USW-INDUSTRIAL-DIN-8-POE 8-Port GbE PoE++ Switch with 2× SFP
Ubiquiti USW-INDUSTRIAL-DIN-8-POE 8-Port GbE PoE++ Switch with 2× SFP
Ubiquiti USW-INDUSTRIAL-DIN-8-POE 8-Port GbE PoE++ Switch with 2× SFP
Ubiquiti USW-INDUSTRIAL-DIN-8-POE 8-Port GbE PoE++ Switch with 2× SFP
Ubiquiti USW-INDUSTRIAL-DIN-8-POE 8-Port GbE PoE++ Switch with 2× SFP
Ubiquiti USW-INDUSTRIAL-DIN-8-POE 8-Port GbE PoE++ Switch with 2× SFP
Ubiquiti USW-INDUSTRIAL-DIN-8-POE 8-Port GbE PoE++ Switch with 2× SFP
Ubiquiti

Ubiquiti USW-INDUSTRIAL-DIN-8-POE 8-Port GbE PoE++ Switch with 2× SFP

SKU: usw-industrial-din-8-poe|Unavailable

The Ubiquiti 8-Port GbE PoE++ Switch with 2 SFP is a compact industrial switch for DIN-rail and wall mounting that provides eight Gigabit PoE++ ports with up to 60 W per port and two 1G SFP uplinks. Its redundant DC power supply and extended temperature range make it suitable for industrial environments.

PoE ports (PoE++)
8
Max. PoE power per port (PSE, PoE++)
60 W
Total PoE availability
Max. 480 W
Max. power consumption
12 W (without PoE output), 492 W (including PoE output)

€412.38excl. VAT

Availability on requestOur engineers can propose alternatives or the successor model.

Description

Benefits at a Glance

  • Compact form factor: DIN-rail and wall mounting in an aluminum enclosure with dimensions 139 × 100 × 52 mm.
  • High PoE availability: Up to 480 W total PoE power across eight PoE++ ports with up to 60 W each.
  • Redundant power supply: Two 2-pin DC inputs with terminal block in the voltage range 44–57 V DC.
  • Industrial-grade ruggedness: Operating temperature from −30 to 70 °C and ESD protection up to ±15 kV (air) and ±8 kV (contact).
  • Uplink flexibility: Two 1G SFP ports complement the eight Gigabit RJ45 ports.

Performance & Throughput

The switch offers a switching capacity of 20 Gbps and a total non-blocking throughput of 10 Gbps. The forwarding rate is 14.88 Mpps. With a MAC address table for 8,000 entries and a packet buffer of 0.5 MB, the device is designed for demanding network loads in industrial environments. Up to 1,000 VLANs are supported.

Design & Power Supply

The enclosure is made of aluminum, the bracket of polycarbonate. Without the bracket the switch weighs 910 g, with the plastic bracket 930 g. Power is supplied via two DC inputs with terminal block, which enable redundancy and cover a voltage range of 44–57 V DC. Maximum power consumption is 12 W without PoE output and 492 W including PoE output. An alarm relay with NC/COM/NO dry contact supports DC up to 30 V DC (max. 1 A) and AC up to 125 V AC (max. 0.3 A).

Management & Security Features

Management is via Ethernet and Serial Console. The switch supports LACP port aggregation, STP & RSTP, IGMP snooping with extended configuration (Querier, Fast Leave, Router Port) as well as 802.1X control. Security features include MAC-based ACLs and device isolation, DHCP snooping & guarding, IP-based ACLs and network isolation, MAC address blocking, port-based isolation and MAC-based port restriction. In addition, egress rate limit, flow control, storm control, multicast & broadcast rate limiting, port mirroring, loop protection, jumbo frames, LLDP-MED, voice VLAN and virtual network override are available. 128 IPv4 access lists and 128 MAC access lists are supported.

Certifications & Compliance

The switch is NDAA compliant and carries CE, FCC and IC certifications. LEDs for Ethernet, SFP and system indicate operating status. Operating humidity is 5 to 95% non-condensing.