SWIRL V1-01 | X-Polarised, Omni-Directional 5G/LTE (without base)€387.94excl. VATRRP €449.00−14%
SWIRL V1-01 X-Polarised 5G/LTE antenna, white dome with orange center ring and ribbed textures, shown without base for
SWIRL V1-01 X-Polarised 5G/LTE antenna with two mounting options—magnetic feet and surface plate—in a white disc design for
SWIRL V1-01 X-Polarised 5G/LTE antenna shown top-down with Peplink logo and indicator lights on black background.
SWIRL V1-01 X-Polarised 5G/LTE antenna, white square device with rounded corners and Peplink logo, designed for
SWIRL V1-01 X-Polarised 5G/LTE antenna, white square unit with rounded corners and Peplink logo, shown without base for
PEPWAVE SWIRL V1-01 X-Polarised 5G/LTE antenna, white square device with grey logo on green background for omni-directional
SWIRL V1-01 X-Polarised 5G/LTE omni-directional antenna with ribbed white housing, Peplink logo, and dual coaxial
SWIRL V1-01 X-Polarised 5G/LTE antenna rear view showing Ethernet ports, DC input, status LEDs, and Peplink logo for
SWIRL V1-01 X-Polarised 5G/LTE router with Peplink networking devices including white routers and black rack-mounted
SWIRL V1-01 X-Polarised 5G/LTE network switches in staggered rack-mounted setup with Peplink logo, RJ45 and SFP ports for
Poynting

Poynting SWIRL V1-01 | X-Polarised, Omni-Directional 5G/LTE (without base)

SKU: a-swirl-0004-v1-01|Only 1 ready to ship!

It covers the cellular frequency range from 617 to 6000 MHz and achieves a peak gain of 6 dBi.

MIMO
4×4
Polarization
X-Polarised
LTE ports
4
Wi-Fi ports
2

€387.94excl. VATRRP €449.00−14%

Description

Key Benefits at a Glance

  • 4×4 MIMO: four cross-polarized cellular antennas for improved signal strength
  • Dual-band Wi-Fi: supports Wi-Fi 3 through Wi-Fi 7 via two ports
  • GNSS reception: GPS L1 and L5 bands via a dedicated port
  • Omnidirectional pattern: uniform coverage in all directions
  • High environmental protection for demanding operating conditions
  • ECE R10: approval under ECE Regulation No. 10 for vehicle use

Connectivity & Frequency Coverage

The antenna integrates four cross-polarized cellular antennas for 4×4 MIMO operation across LTE and 5G networks. The cellular frequency range spans from 617 to 6000 MHz, covering a wide array of 5G and LTE bands, including n1, n3, n28, n77, n78, and others. Cross-polarization in both horizontal and vertical planes enhances signal quality under varying reception conditions.

Two Wi-Fi ports support standards from Wi-Fi 3 (802.11g) to Wi-Fi 7 (802.11be), covering the 2.4 GHz and 5 to 7.2 GHz frequency bands. A dedicated GNSS port provides reception for the GPS L1 and L5 bands. This combines cellular, Wi-Fi, and satellite navigation connectivity in a single unit.

Design & Installation

The antenna has a diameter of 382 mm and a height of 127 mm. It supports both magnetic mounting and surface mounting, offering flexible installation options on vehicles and onboard vessels. The connector is RP-SMA (m) with an RTK-031 type coaxial cable, 0.65 m in length. The design ensures protection against dust and water ingress under demanding conditions.

The specified coverage range is ±24 km (15 mi). The BRKT-92 mounting bracket is available as an accessory. The antenna is supplied in white.

Certification & Compliance

The antenna holds approval under ECE Regulation No. 10, including Amendment No. 06 Supplement 03, with approval number E1*10R06/03*10530*00. The technical service responsible for conducting the tests was Akkodis Germany EMC GmbH. The test report is dated 07.03.2025 and bears the number P250020.

Type identification is provided via the order number and variant designation, marked on the housing or cable. The ECE approval mark is affixed as a sticker on the housing or cable. The antenna is classified as part of the SWIRL-Series and is manufactured by POYNTING ANTENNAS (PTY) LTD.

Downloads

Frequently Asked Questions (FAQ)

What warranty does the product come with?
The product comes with a warranty of 24 months.
What certifications does the product carry?
This product carries the following certifications: E1*10R06/03*10530*00 (ECE Regulation No. 10).