Ubiquiti 60GHz Wave Pro 60/5GHz-Client 2,7Gbps 15km+

The Ubiquiti 60GHz Wave Pro is a high-capacity 60 GHz / 5 GHz wireless client engineered for long-distance point-to-point and point-to-multipoint links. It delivers up to 2.7 Gbps of throughput per link and reaches distances of up to 15 km in PtP mode, making it suited to enterprise backhaul deployments that require high-capacity connectivity over challenging spans. Highlights at a Glance Dual-band radio: operates in the 60 GHz and 5 GHz frequency bands for high-capacity wireless links Long-distance reach: supports PtP links up to 15 km and PtMP links up to 8 km with a Wave AP High throughput: 2.7 Gbps per link with a total throughput of 5.4 Gbps 10G SFP+ uplink: two 2.5 GbE RJ45 ports and one 10G SFP+ port for flexible network connectivity Weather-resistant build: IPX6-rated enclosure in aluminum alloy and UV-stabilized polycarbonate GPS-assisted alignment: integrated GPS with a dedicated antenna-alignment utility for precise installation Performance & Throughput The Wave Pro combines a high-capacity 60 GHz radio with a 5 GHz fallback radio, delivering up to 2.7 Gbps of throughput per link and a total throughput of 5.4 Gbps. In point-to-point mode it supports link distances of up to 15 km, while in point-to-multipoint mode it reaches up to 8 km when paired with a Wave AP, up to 6 km with a Wave AP Micro or Wave AP Gen2. The 60 GHz radio operates across thirteen channels from 58320 to 70560 MHz, and the 5 GHz radio covers the 5150–5875 MHz worldwide frequency range with channel bandwidths of 20, 40, and 80 MHz. A 22 dBi antenna with dual-linear polarization and a narrow 8° beamwidth in both azimuth and elevation concentrates the signal for focused, long-distance transmission. The device supports a full modulation range from BPSK through 1024QAM, allowing it to adapt throughput to prevailing link conditions. Cross-polar isolation is rated at 20 dB, and electrical downtilt is 0°. Design & Power The enclosure is constructed from aluminum alloy and UV-stabilized polycarbonate, with a stainless steel mount designed for pole diameters of 25 to 76.2 mm. The device measures 424.4 mm in diameter and 166.2 mm in height, weighing 2.8 kg without the mount and 4 kg with it. Wind loading is rated at 369 N at 200 km/h, and the unit carries an IPX6 weatherproofing rating for outdoor deployment. Power is delivered via passive PoE, supporting 44–54V DC on 4-pair or 2-pair configurations, with a supported voltage range that also includes 22–27V DC. Maximum power consumption is 26W, and a 48V DC, 0.65A, 2.5 GbE PoE adapter is included in the box. The enclosure is designed for a wide range of environmental conditions, with humidity tolerance from 5 to 95% noncondensing. Management & Features The Wave Pro is managed through Ubiquiti's UISP platform, requiring UISP version 2.3.0 or later. It operates in bridge or router mode and supports point-to-point, point-to-multipoint, and station operating modes. Built-in services include Ping Watchdog, NTP client, and SNMP, alongside Ubiquiti-specific features such as a discovery protocol and traffic shaping with burst support. Integrated tools and utilities support installation and ongoing operation. Wave AI and Wave Technology optimize link performance, while the antenna-alignment utility, ping, site survey, speed test, traceroute, discovery utility, and cable test functions assist with deployment and troubleshooting. A factory reset button and a comprehensive LED array provide status indication for power, Ethernet, GPS, link type, and SFP+ activity. Security & Compliance Wireless links are secured with WPA2-PSK (AES) encryption. The device is NDAA compliant and designed to meet regulatory standards. A 12-month warranty is provided. Technical Specifications Processor: Quad-core ARM® Cortex®-A53 at 1.4 GHz Memory: 512 MB Networking Interface: (2) 2.5 GbE RJ45 ports, (1) 10G SFP+ port Max. Power Consumption: 26W Power Method: Passive PoE 4-pairs (1, 2+; 3, 6-) (4, 5+; 7, 8-) and Passive PoE 2-pairs (4, 5+; 7, 8-), for 44–54V DC only Supported Voltage Range: 44–54V DC, 22–27V DC Power Supply: 48V DC, 0.65A, 2.5 GbE PoE adapter (included) GPS: Yes Buttons: (1) Factory reset Ambient Operating Humidity: 5 to 95% noncondensing NDAA Compliant: Yes Dimensions: ⌀424.4 x 166.2 mm (⌀16.7 x 6.5") Weight: Without mount: 2.8 kg (6.2 lb), with mount: 4 kg (8.8 lb) Enclosure Material: Aluminum alloy, UV stabilized polycarbonate Mount Material: Stainless steel Pole Mount Diameter: 25 to 76.2 mm (1 to 3") Wind Loading: 369 N at 200 km/h (83 lbf at 125 mph) Weatherproofing: IPX6 Frequency Band: 60 GHz / 5 GHz Operating Channels (60 GHz): 58320, 59400, 60480, 61560, 62640, 63720, 64800, 65880, 66960, 68040, 69120, 70200, 70560 MHz Operating Frequency (Worldwide, 5 GHz): 5150–5875 MHz Channel Bandwidth: 20, 40, 80 MHz Modulation: BPSK (1⁄2), QPSK (1⁄2), QPSK (3⁄4), 16QAM (1⁄2), 16QAM (3⁄4), 64QAM (2⁄3), 64QAM (3⁄4), 64QAM (5⁄6), 256QAM (3⁄4), 256QAM (5⁄6), 1024QAM (3⁄4), 1024QAM (5⁄6) Antenna Gain: 22 dBi Polarization: Dual-Linear Beamwidth: Azimuth: 8° (3 dB), Elevation: 8° (3 dB) Cross-Pol Isolation: 20 dB Electrical Downtilt: 0° WiFi Standard: 802.11ax (WiFi 6) Operating Modes: PtP, PtMP, Station Network Mode: Bridge/Router Total Throughput: 5.4 Gbps Throughput per Link: 2.7 Gbps Max. Range (PtP): Up to 15 km (9.3 miles) Max. Range (PtMP): Up to 8 km (Wave AP), up to 6 km (Wave AP Micro, Wave AP Gen2) Encryption: WPA2-PSK (AES) Warranty: 12 months