















D-Link
D-Link DGS-1510-28XMP network switch Managed L2/L3 Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) Black, Grey
SKU: dgs-1510-28xmp|Unavailable
Description
The DGS-1510-28XMP is a managed Layer 2/L3 Gigabit Ethernet switch with 24 PoE-enabled 10/100/1000BASE-T ports and four 10G SFP+ uplinks, delivering a 370 W PoE budget and 128 Gbps switching capacity for business networks.
Highlights at a Glance
24 PoE ports with up to 30 W per port and a 370 W total budget
Four 10G SFP+ uplinks for high-speed fibre connectivity
Layer 2/L3 management with static routing and MSTP support
Physical stacking of up to 6 units at 40G bandwidth
Single IP Management for up to 32 units under one IP
D-Link Green 3.0 energy-saving technology with time-based PoE
128 Gbps switching capacity and 95.24 Mpps forwarding rate
Performance & Throughput
The switch provides 128 Gbps switching capacity with a maximum packet forwarding rate of 95.24 Mpps. It uses store-and-forward transmission and supports jumbo frames up to 9216 bytes. The MAC address table holds 16,384 entries per device, and the packet buffer memory is 1.5 MB. Static routing is supported with 64 IPv4 and 32 IPv6 route entries, complementing the Layer 2 feature set with Layer 3 capabilities.
Power over Ethernet
All 24 Gigabit ports support Power over Ethernet compliant with IEEE 802.3af and IEEE 802.3at, delivering up to 30 W per port to devices such as IP cameras, VoIP phones, and wireless access points. The total PoE power budget is 370 W, which can be increased to 740 W when used with a DPS-700. Time-based PoE allows power to a port to be shut off at a scheduled time, reducing energy usage during non-business hours. PD-Alive is supported on this PoE model.
Stacking & Management
Physical stacking supports up to 6 units with 40G stacking bandwidth full duplex, enabling scalable network growth. D-Link Single IP Management (SIM) allows managing up to 32 units under a single IP address. A console port is included for direct access. The switch also supports G.8032 ERPS, 802.1D Spanning Tree, 802.1w Rapid Spanning Tree, and 802.1s Multiple Spanning Tree for resilient network topologies.
Layer 2 Features, QoS & Access Control
The switch supports 802.1Q VLAN with up to 4094 VLAN groups, along with port-based, MAC-based, protocol-based, voice, and auto surveillance VLANs. IGMP snooping supports up to 512 groups with fast leave and proxy reporting, and MLD snooping is also supported. Link aggregation follows 802.1AX and 802.3ad with up to 32 groups and 8 ports per group. Eight hardware queues per port provide quality of service through strict priority, weighted round robin, deficit round robin, and combined SPQ+WRR scheduling. Access control lists include MAC, IP, IPv6, and time-based ACLs. Loopback detection and port mirroring are supported, including flow-based ACL mirroring.
Design, Environment & Compliance
The switch is designed for 19-inch standard rack mounting in a 1U form factor, measuring 440 x 308.5 x 44 mm and weighing 4.25 kg. It is suitable for a wide range of operating conditions with humidity tolerance from 0 to 95% relative humidity. Two DC fans provide cooling with an acoustic level of 56.9 dB(A). The internal universal power supply accepts 100 to 240 VAC at 50/60 Hz, with maximum power consumption of 436.3 W with PoE on and 38.4 W with PoE off. MTBF is rated at 274,796 hours. D-Link Green 3.0 technology provides power saving through link status detection, LED shutoff, port shutoff, and system hibernation mode, and IEEE 802.3az Energy Efficient Ethernet is supported. The switch carries CE, FCC, C-Tick, VCCI, BSMI, CCC, cUL, and CB certifications, plus the IPv6 Ready Logo Phase 2.
Technical Specifications
Ports: 24 x 10/100/1000BASE-T PoE + 4 x 10G SFP+
Switching capacity: 128 Gbps
Packet forwarding rate: 95.24 Mpps
MAC address table: 16,384 entries per device
Packet buffer: 1.5 MB per device
Jumbo frame size: 9216 bytes
Transmission method: Store-and-forward
PoE standard: IEEE 802.3af, IEEE 802.3at
Max PoE per port: 30 W
PoE power budget: 370 W (740 W with DPS-700)
Max power consumption: 436.3 W (PoE on), 38.4 W (PoE off)
Standby power consumption: 24.5 W at 100V, 28.2 W at 240V
Power input: 100 - 240 VAC, 50/60 Hz internal universal power supply
Static routing: 64 IPv4 entries, 32 IPv6 entries
VLAN groups: 4094
Link aggregation groups: 32 per device, 8 ports per group
IGMP snooping groups: 512
IP interfaces: 16
ARP entries: 512
Hardware queues: 8
Physical stacking: Up to 6 units, 40G bandwidth full duplex
Single IP Management: Up to 32 units
CPU speed: 400 MHz
DRAM: 256 MB
Flash memory: 32 MB
Dimensions: 440 x 308.5 x 44 mm
Weight: 4.25 kg
Rack mounting: 19-inch standard, 1U
Fans: 2 DC fans
Acoustic: 56.9 dB(A)
Storage temperature: -20 to 70°C
Operating humidity: 0% to 95% RH
MTBF: 274,796 hours
Max heat dissipation: 1487.8 BTU/hr
Certifications: CE, FCC, C-Tick, VCCI, BSMI, CCC, IPv6 Ready Logo Phase 2, cUL, CB
AI Fact Sheet
# D-Link DGS-1510-28XMP network switch Managed L2/L3 Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) Black, Grey
The D-Link DGS-1510-28XMP is a managed L2/L3 Gigabit Ethernet stackable switch with 24 PoE-enabled 10/100/1000 Mbps ports and 4 10G SFP+ uplink/stacking ports, designed for business networks requiring Power over Ethernet and 10G connectivity.
Key facts:
- Ports: 24 × 10/100/1000 Mbps PoE ports + 4 × 10G SFP+ ports
- PoE: IEEE 802.3af/at, up to 30 W per port, 370 W total budget (740 W with DPS-700)
- Switching capacity: 128 Gbps; forwarding rate: 95.24 Mpps
- Stacking: up to 6 units, 40 G stacking bandwidth full duplex
- Static routing: 64 IPv4 entries, 32 IPv6 entries
- Power input: 100–240 VAC; max consumption 436.3 W (PoE on), 38.4 W (PoE off)
- Dimensions: 440 × 308.5 × 44 mm (1U, 19" rack mount); operating temperature -5 to 50°C
- Certifications: CE, FCC, C-Tick, VCCI, BSMI, CCC, IPv6 Ready Logo Phase 2, cUL, CB
Ideal for: Business networks of all sizes needing PoE for IP cameras, VoIP phones, and wireless access points, with 10G uplinks and physical stacking for scalable core-to-edge interconnection.
Machine-readable — citable by AI bots and assistants.
Downloads
Frequently Asked Questions (FAQ)
What certifications does the product carry?
This product carries the following certifications: CE, FCC, C-Tick, VCCI, BSMI, CCC, IPv6 Ready Logo Phase 2, cUL, CB.
Related products
- D-Link G416C/E 4G LTE AX1500 Wi-Fi 6 Router€110.56excl. VAT

- D-Link DXS-1210-28S network switch Managed 10G Ethernet (100/1000/10000) 1U Black€1,971.73excl. VATRRP €2,063.87−4%

- D-Link DMS-1250-10SP/E-10-Port PoE MGigabit Smart Mngd Switch€406.10excl. VATRRP €429.41−5%

- D-Link DAS-P-WiFi Wireless LAN Planning-Service€201.11excl. VATRRP €235.29−15%

- D-Link DBS-2000-10MP network switch Managed Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) Grey€318.34excl. VAT




